T-Rex Big 3D Printer Model
The file 'T-Rex Big 3D Printer Model' is (stl) file type, size is 62.0MB.
The file 'T-Rex Big 3D Printer Model' is (stl) file type, size is 62.0MB.
T-Rex project shows the possibility provided by 3D printing with Sharebot NG to realize big size prototypes with every printing plate by studying and assembling different parts .
the approximative dimension of the model is 2000mm x 900mm
( Minimum bed size 200x200x200mm )
printer used: Sharebot NG
The parts are glued together using any instant glue, colored with acrylic and refined with a brushed coffee to give an antique effect
more info about this project here
http://www.sharebot.it/index.php/progetti-3d/
| attaccomani.stl | 3.8MB | |
| coda.stl | 3.9MB | |
| coda116.stl | 14.5MB | |
| coda84A.stl | 14.2MB | |
| coda_107.stl | 14.5MB | |
| coda_113.stl | 14.4MB | |
| coda_28.stl | 12.9MB | |
| Coda_30.stl | 9.2MB | |
| coda_33.stl | 9.3MB | |
| Coda_39.stl | 10.7MB | |
| coda_43.stl | 11.7MB | |
| Coda_48.stl | 12.9MB | |
| coda_53.stl | 13.4MB | |
| coda_59.stl | 13.7MB | |
| coda_65.stl | 13.5MB | |
| coda_73.stl | 14.2MB | |
| coda_97.stl | 14.5MB | |
| Cods_36.stl | 9.6MB | |
| collo1.stl | 7.3MB | |
| collo2.stl | 6.4MB | |
| collo3.stl | 4.9MB | |
| collo4.stl | 3.2MB | |
| corpo1.stl | 6.1MB | |
| corpo2.stl | 6.0MB | |
| gamba2sx.stl | 10.9MB | |
| gamba3dx.stl | 9.2MB | |
| gamba3sx.stl | 5.8MB | |
| gamba4dx.stl | 5.8MB | |
| gamba4sx.stl | 9.0MB | |
| gamba5dx.stl | 1.4MB | |
| gamba5sx.stl | 1.4MB | |
| gamba6dx.stl | 2.7MB | |
| gamba6sx.stl | 2.7MB | |
| GAMBA_2DX.stl | 10.6MB | |
| incastri.stl | 3.5MB | |
| mani_servono_supporti.stl | 9.7MB | |
| sampa_sopra_sx.stl | 11.0MB | |
| supporto3.stl | 23.1MB | |
| TESTA_SOPRA_1.stl | 10.6MB | |
| TESTA_SOPRA_2.stl | 3.5MB | |
| TESTA_SOTTO.stl | 10.0MB | |
| zampa_dx.stl | 7.8MB | |
| zampa_sx.stl | 7.6MB |
