Case for popular inexpensive t-handle adjustable tap wrench.
There is also a place to store tap thread cutters and drill bits for them.
As a connecting rod I used a regular nail with a diameter of 1.8mm and a length of 50mm. But you can use average filament 1.75mm, i tried and it works fine.
I made the tray for taps and drills only for the sizes that I have. But in addition, I made a tray-blank without holes, and you can model any set of holes
| Tap_Case.STEP | 4.0MB | |
| Tap_Case.STL | 29.0MB | |
| Tap_Case_1.STL | 24.8MB | |
| Tap_Tray_1.STL | 804.0KB | |
| Tap_Tray_2_blank.STL | 178.2KB |
