All the files where printed out of pla at 200°c hotend and 60°c bed but the tank inserts where printed out of tpe at 220°c hotend and 70°c bed and the printing speed set to 7 mm/s, anithing faster ends in a pile of spagetti so DONT USE TPE because it is terrible to work whith (but if you can get it for free than it is not that terrible). Sorry for the mixture of hungarian and english file names.
| 8a_buck_tarto_also.stl | 16.9KB | |
| 8a_buck_tarto_felso.stl | 16.9KB | |
| bal_motortaro_blokk.stl | 80.8KB | |
| camera_and_micro_servo_mount.stl | 61.0KB | |
| Gripper_Base.stl | 133.1KB | |
| Gripper_Jaw.stl | 59.4KB | |
| Gripper_Pinion.stl | 497.1KB | |
| Gripper_Rack.stl | 294.7KB | |
| hex_tarto_fent.stl | 5.9KB | |
| hex_tarto_lent.stl | 5.9KB | |
| kapcsolotarto.stl | 16.2KB | |
| mainfogaskerek.stl | 385.6KB | |
| motorcontroller_spacer.stl | 7.9KB | |
| motortaro_blokk_linear_actuátor.stl | 111.0KB | |
| motortarto.stl | 94.2KB | |
| motortarto_lec.stl | 66.3KB | |
| motortarto_lec_also.stl | 66.0KB | |
| Parkside_X20V_Battery_Adapter_ErCan_Everything.stl | 927.1KB | |
| pi4_tok_felso.stl | 152.6KB | |
| Pitsco_Education-36460_TETRIX_MAX_Tank_Track.stl | 95.1KB | |
| Raspberry_Pi4_-_Bottom.stl | 133.7KB | |
| solenid_tartó.stl | 64.5KB | |
| tank_lánctalp_insert_rubber_1_1.stl | 6.7KB | |
| wago_mount.stl | 11.6KB |
