Syringe “squeezer” To Filter Viscous Fluids 3D Printer Model
The file 'Syringe “squeezer” To Filter Viscous Fluids 3D Printer Model' is (STL,STEP) file type, size is 1.9MB.
The file 'Syringe “squeezer” To Filter Viscous Fluids 3D Printer Model' is (STL,STEP) file type, size is 1.9MB.
This tool is a squeezer i use to force a viscous fluid through a syringe filter.
In the off chance that like me, you need to filter a syrup like fluid through a syringe filter, you will find it much easier to do with this than by hand...
Load the syringe and add some air to serve as a spring, put the syringe in the system and add the filter. Screw on the device and you can just patiently wait for the liquid to filter through.
Compatible with most 1 to 3 ml syringes. Only use syringe with a screw retention system if you don't want the filter to pop off inadvertently...
This design uses 1 M3 screw (10 to 20mm) to fix the head to the screw. I added the STEP file i case you want to modify the design.
Edit: I modified the "main body" part a little to be able to load the syringe with the filter attached. The corresponding file is "main body V2"
| Head.STL | 231.1KB | |
| Main_body.STL | 530.1KB | |
| Main_body_V2.STL | 698.6KB | |
| Screw.STL | 2.7MB | |
| Syringe_squeezer.STEP | 175.8KB |
