Case for the Syride SysNAV V3, will probably work with the GPS and Alti too.
Insert a piece of transparant acryllic / polycarbonate 45 x 45 x 2 mm for protection of the screen.
I created this so i don't have to worry about breaking the vario, the case should be very durable.
I printed it in PETG, 0.2 mm layer height, no supports needed.
To close the case use tape or glue., or you can also drill the holes trough the whole vario and use bolts (if you are carefull you can drill trough the vario with a 4mm drill bit and use M4 x 28mm screws)
| bovenkant_syride_hoesje.stl | 496.8KB | |
| onderkant_syride_hoesje.stl | 417.0KB |
