Synchronous alternator model for stationary engines.
Use as a trinket or you can install R/C motor as a generator.
Add lift eye in the top hole like this: Get M3 short screw and spring washer, give them stainles steel soldering acid, solder them together, you now have miniature lift eye for it.
500kv outrunner R/C motor with M8 right thread and 14mm mount hole separation.
Walkera Tali H500 500kV Brushless Motor right Thread WK-WS-34-001
sadly not available anymore
About 6000 rpm will give you 7,5V open, 2A short. Not for quick charging but good enough for step down to USB 5V charger.
| Fake_hridel.stl | 22.3KB | |
| Generator_2.FCStd | 2.2MB | |
| Predni_celo2.stl | 150.5KB | |
| Predni_celo_deska2.stl | 46.6KB | |
| Realna_hridel.stl | 63.6KB | |
| Remenice2.stl | 70.4KB | |
| Stator2.stl | 229.8KB | |
| Zadni_celo2.stl | 157.3KB | |
| Zadni_celo_deska.stl | 106.1KB |
