Sick of looking at my kids Syma Z4W Drone laying on the floor so i decided to design and print a holder. This was designed for the Z4W but there are a number of Syma drones that use this same exact controller that this will work for.
I Printed this in pieces to make printing it much easier. You could place this on your slicer such that your printer does this as 1 solid object if you have a large enough print surface.
But the Hooks attach with 2 M3x10mm screws and a pair of M3 bolts (12mm would work, if you pushed screw in from the back and the nut was on the inside, there is enough clearance inside to not cause issues.. i built the recess for the hex head on either side so you could run the screw through either side and it wont protrude either way.
In the images above, you see a washer behind my mount screw, as this was my first "test" print that i'm using, it did not have the Beveled screw hole mount yet..
If you print this, please share a make!
| Syma_Remote_and_Z4W_Drone_Holder-Base.stl | 183.2KB | |
| Syma_Remote_and_Z4W_Drone_Holder-Hooks.stl | 61.9KB |
