This is my version of the weapon that Sylvie Laufedottir (lady loki?) uses in that new Loki series. Since I was only able to find a single good reference picture from the net, the details might be off compared to what it should be.
Model is pre-sliced into four parts (+ peg), so it should be printable with 200mm bed. There is also one full model.
The length is something like 64cm. I have no idea what is the real scale, but it should be still scalable to larger if needed, even with 200mm bed.
12.7.2021.
Okay, added part 5 and 6. With these it is possible to print blade separate from the hilt replacing the part 2.
16.7.2021 I was asked to include a full model with interiors cleaned. That is the part "fullModel_cleaned".
29.7.2021. Use the zip file (fixedStuff-29-7-2021) version if you are having errors with peg holes disappearing. I recalculated the normals, so now shouldnt have any errors.
| fixedStuff-29-7-2021.zip | 55.2MB | |
| fullModel_cleaned.stl | 30.6MB | |
| fullModel_decimated.stl | 45.1MB | |
| part_1.stl | 22.6MB | |
| part_2.stl | 16.4MB | |
| part_3.stl | 4.0MB | |
| part_4.stl | 692.7KB | |
| part_5_BLADE.stl | 1.9MB | |
| part_6_BLADEHOLDER2.stl | 20.8MB | |
| peg.stl | 684.0B |
