The file 'Sword Art Online: Alicization – Eugeo Blue Rose Sword 1:1 Assembly (Normal Size) With Shield 3D Printer Model' is (STL) file type, size is 9.1MB.
22/07/2021 Updated
I Cant believe i couldn't even spell the (Shield) word, lol !!
**If you got bigger printer***
Note:
Added full size of sword in 1 piece
Added full size of shield in 1 piece
Sorry for my very very late response to people , due to my job position changes.
Thanks
06/05/0291 Updated !!!!!
Added Shield for the sword, bit more fancy look now !
Rework from my original design, full assembly length 1.2m long
Material requirment (both can be purchase from ebay):
20x10 x720mm aluminium bar
(Reqiure Drill 20mm Deep and tapped M8 x 1 thread)
Purchase link below:
https://www.ebay.co.uk/itm/Aluminium-Flat-Bar-many-size-choose-Length-up-to-500mm-to-2000mm/252550214551?ssPageName=STRK%3AMEBIDX%3AIT&var=551457392121&_trksid=p2060353.m1438.l2649
M8 x1 x 270mm threaded Steel Rod
Parts Printed with PLA or ABS whatever you like
glue i used (solvent), can weld the PLA or ABS plastic very well and fast
Linkl Below i brought from:
https://www.screwfix.com/p/weld-on-wo-611-solvent-cement-250ml/5327v
Enjoy!
| A1.STL | 1.0MB | |
| A2.STL | 1.1MB | |
| A3.STL | 29.0KB | |
| B1.STL | 612.2KB | |
| B2.STL | 1.6MB | |
| B3.STL | 255.3KB | |
| B4.STL | 2.9MB | |
| C1.STL | 382.3KB | |
| C2.STL | 111.1KB | |
| C3.STL | 42.0KB | |
| C4.STL | 37.1KB | |
| C5.STL | 40.6KB | |
| C6.STL | 112.0KB | |
| P1.STL | 1.2MB | |
| P2.STL | 118.7KB | |
| P3.STL | 104.3KB | |
| P4.STL | 168.6KB | |
| P5.STL | 209.0KB | |
| P6.STL | 1.3KB | |
| Shield_In_1.STL | 1.3MB | |
| Sword_Assy_In_1.STL | 10.7MB |
