These are boxes to house switches on a motorcycle's handlebar.
The boxes are mounted on top of the brake or clutch fluid reservoirs.
They come in 4 flavours:
For mounting these you need a U-shaped bracket of 73x35x15mm
screwed on your (replacement) fluid reservoir lid.
Also the bevel on the bottom is missing.
It's shape depends on the shape of the edge of the lid, so you have to fit it yourself - sorry.
The cutouts for the switches are designed for Marquardt series 1800 switches and lamps. They are a bit snug fit, so you may want to file the holes and/or clips of the switches. The measurements are taken from the Marquardt data sheets.
Enjoy!
| Switchbox_3S.scad | 9.7KB | |
| Switchbox_3S_left.stl | 311.1KB | |
| Switchbox_3S_right.stl | 310.6KB | |
| Switchbox_4S.scad | 10.0KB | |
| Switchbox_4S_left.stl | 311.2KB | |
| Switchbox_4S_right.stl | 310.8KB |
