Switch Case — The Legend Of Zelda: Tears Of The Kingdom 普尔亚平板 3D Printer Model
The file 'Switch Case — The Legend Of Zelda: Tears Of The Kingdom 普尔亚平板 3D Printer Model' is (stl) file type, size is 92.4MB.
The file 'Switch Case — The Legend Of Zelda: Tears Of The Kingdom 普尔亚平板 3D Printer Model' is (stl) file type, size is 92.4MB.
2024-11-03：
The version with heat dissipation has been updated, and you can choose the version with heat dissipation or without heat dissipation according to your personal preference
A set of heightened keys has been added.,You can try to replace it if you have hands-on ability.,It should be able to solve the problem of not being able to press the button. Or change the model yourself.
It is recommended to use resin materials for printing.
————————————
卡扣可能会太紧，需要自行打磨
The buckle part may be tight and needs to be sharpened
This version doesn't leave a place for the heat vents, and I think the location of the heat vents will ruin its appearance, so I don't recommend wearing it for games, that would heat up the machine. But as a decoration it was still good.You can use it to decorate idle switch
I don't have a 3d printer, which makes it difficult to test the model, if you make it, please post a make for me to see it, your feedback is very helpful for me, thanks
| Data_cable-behind.stl | 11.2MB | |
| Data_cable-front.stl | 11.4MB | |
| host.stl | 47.1MB | |
| joycon-Lbehind.stl | 17.3MB | |
| joycon-Lfront.stl | 24.4MB | |
| joycon-Rbehind.stl | 33.7MB | |
| joycon-Rfront.stl | 25.4MB | |
| keystroke.stl | 19.2MB | |
| part01.stl | 509.4KB | |
| part02.stl | 572.5KB | |
| part03.stl | 607.1KB | |
| part04.stl | 9.3MB | |
| part05.stl | 3.8MB | |
| part06.stl | 1.9MB | |
| Shoulder_buttons-L.stl | 3.2MB | |
| Shoulder_buttons-R.stl | 3.2MB | |
| Version_with_heat_vents.stl | 49.2MB |
