Swift Stereo Ninety (vintage) Microscope To UNZANO UHD920 Adapter 3D Printer Model
The file 'Swift Stereo Ninety (vintage) Microscope To UNZANO UHD920 Adapter 3D Printer Model' is (stl,blend,md) file type, size is 931.1KB.
The file 'Swift Stereo Ninety (vintage) Microscope To UNZANO UHD920 Adapter 3D Printer Model' is (stl,blend,md) file type, size is 931.1KB.
If you permanently mod the UNZANO UHD920 webcam you can install it on this microscope (see microscope photo).
NOTE: Due to using aftermarket WF10/20 "glasses" (far range) eyepieces, your experience may differ! You may have to move the "eyepiece - WF10/20" object in Blender up or down then re-export the STL to allow for good focus with a different lens! You can experiment on moving it farther away by not installing it all the way. If you focus the dials but have an image that is too small or too large on your webcam, that's when you will have to adjust the distance then refocus. You then may have to change the model and re-print to match your adjustment, or just add a spacer ring if it has to be farther rather than closer.
| Swift_Stereo_Ninety-to_UNZANO_UHD920.stl | 758.3KB | |
| Swift_Stereo_Ninety.blend | 2.8MB | |
| Swift_Stereo_Ninety.md | 4.3KB |
