The file 'SWERVE BODY SHEILD 3D Printer Model' is (3mf,gcode,pdf,stp,stl) file type, size is 7.6MB.
This is a body surround (grease sheild) for a West Coast Products, 2nd generation (before the X drive), swerve module (part number WCP-0169). It is a 2-part surround designed to be snapped onto an already-assembled swerve module, snapping onto the vertical mount pillars and held together by two zip-tie buckles. Note that this was designed assuming the body rails are NOT installed above the base flange.
The files include the STL files for both halves as well as a CURA sliced file (for Ender 3 V2) that I used to print. The STEP file of the assembled part (from Inventor) is also included.
| CE3E3V2_WCP-0169_Grease_Sleeve_halves_ver_2.3mf | 157.9KB | |
| CE3E3V2_WCP-0169_Grease_Sleeve_halves_ver_2.gcode | 21.4MB | |
| WCP-0169_grease_shield_assembly_ver_4.pdf | 79.4KB | |
| WCP-0169_grease_shield_assembly_ver_4.stp | 451.0KB | |
| WCP-0169_Grease_Sleeve_front_half.stl | 38.0KB | |
| WCP-0169_Grease_Sleeve_rear_half.stl | 104.5KB | |
| WCP-0169_TYPICAL_with_grease_sheild.pdf | 91.4KB |
