As always I will promote and REWARD the first people to post quality makes (must enable tips on your profile for reward). A quality make is a successful, complete, hopefully decent looking print at 100% scale. Pictures don't need to show it on your CNC or mounted but bonus points if it is.

For those of us converting from the Suckit Dust Boot to a Sweepy or just people who have a 2.5in dust collection hose that needs to go to a 1.4in ID hole (Fein, Festool and other common shop vacs accessory size) this little adapter will make the transition much easier.

Adapts from 36mm (1.4in) ID to a 63.5mm (2.5in) OD with as much offset as possible to clear the router.

Will work with the Sweepy for the Makita (65mm), or Dewalt (69mm) sweepy.

If you need a custom size let me know.

The design is has built in support on the outside of the Sweepy connection port to add a little extra strength to combat the offset load of the dust collection system hose. I also attempted a smooth transition from one port to the other which eliminates build up in sharp corners some other designs may have. This has the added benefit of making it possible to print with no supports, which helps keep the inner path smooth and saves on print time, filament, and cleanup.

Purchase the Sweepy here:
https://shop.carbide3d.com/collections/accessories/products/sweepy-dustboot?variant=31476396785725

*If you are building your dust collection from scratch i recommend checking out some of the following links, they have worked great for me without breaking the bank:

https://www.amazon.com/Oneida-Molded-Dust-Deputy-Cyclone/dp/B002JP315K

https://www.amazon.com/Eagle-1610MB-Polyethylene-Lever-lock-Capacity/dp/B0026GO5CA

https://www.amazon.com/2-1-Ultra-Flex-Clear-Vue-Hose/dp/B01M35BE8D

https://www.amazon.com/Adjustable-Stainless-Clamps-Collection-Automotive/dp/B07PFPWGHD