SWEDISH BIRD HOUSE 3D Printer Model Free Download

Description Files (26)

Summary

This is a bird house designed to look like a traditional Swedish cottage with a small front porch.

You can decide if you want to print the house shell as one piece:

or you can print the house shell in 3 parts:

There are also two mounting plates for the house available:

Patience ( My printing time was ~100h)
Super Glue
A drinking straw (5mm Outer Diameter) for the roof gutter
A M6 Screw and nut or something similar to mount the birdhouse to the mounting braket
4 M4 Nuts and 4 Screws for the detachable roof
I have also used black nail polish and painted the surface for the window and door opening black before i glued the parts to the house.

The standard birdhouse hole size is 30mm (einflugring_gewinde) and 45mm (einflugring). Please have a look here for different birdhouse hole sizes if you want to attract a specific bird.:

Please make sure to add support, when you are printing the roof. The roof is the only part of the assembly that needs a little bit of support at the bottom of the print.
If you have a woodpecker close by the chances are high, that he will like the sound of the birdhouse and will tear big holes in the walls. It happened to me already two times. I really don't have a solution for that. I printed the 3rd house now with almost 100% infill for the walls. I hope this will help.

There is a new assembly for the birdhouse hole. (SCREW: einflugring_gewinde and NUT: einflugring_mutter). You can easily change the hole size for a specific bird type e.g. with the Microsoft 3D Builder.

If someone does not want to have the water reservoir on the bird house I have added modified parts
If someone wants to have a specific hole diameter, you can use the new file "einflugring_gewinde_without_hole.stl" and add the hole with your specific diameter e.g. with the free Microsoft 3D Builder Software

boden_v2.stl	30.6KB
boden_v2_without_water_reservoir.stl	43.4KB
dachblende.stl	3.0KB
dachrinne.stl	53.5KB
dach_komplett.stl	30.0KB
einflugring.stl	195.0KB
einflugring_gewinde.stl	723.7KB
einflugring_gewinde_without_hole.stl	664.4KB
einflugring_mutter.stl	673.1KB
fasssade_01.stl	81.7KB
fasssade_01_without_water_reservoir.stl	72.2KB
fasssade_02_v2.stl	35.6KB
fenster_klein.stl	3.2KB
frontboden.stl	6.1KB
frontdach.stl	9.5KB
frontdachblende.stl	6.9KB
gehaeuse_v2.stl	157.7KB
gehaeuse_v2_without_water_reservoir.stl	144.4KB
kanten.stl	1.8KB
montageleiste.stl	30.0KB
montageleiste_2.stl	21.6KB
seitenwand_links.stl	6.1KB
seitenwand_rechts.stl	6.1KB
tuer.stl	66.3KB
vogelhaus_asm.stp	1.3MB
vogelhaus_asm_without_water_reservoir.stp	2.1MB