SV08 Brush Scrubber 3D Printer Model
The file 'SV08 Brush Scrubber 3D Printer Model' is (stl) file type, size is 7.7KB.
The file 'SV08 Brush Scrubber 3D Printer Model' is (stl) file type, size is 7.7KB.
Special Thanks to Nadir for his SV08 CN3D Shroud V3: https://www.printables.com/model/938796-sv08-cn3d-shroud-v3-extra-fan-magnets-klicky-led/remixes
This is to add back a brush scrubber when using his mods which remove the brush scrubber to add a Klicky. You can use one of these brushes:
You can either replace your existing CLEAN_NOZZLE function or comment it out and use this one:
NOTE: The Z-OFFSET might be off - STILL TESTING PLEASE CHECK BACK (Updated 9/10)
[gcode_macro CLEAN_NOZZLE]
gcode:
{% if printer.toolhead.homed_axes != "xyz" %}
G28
{% endif %}
G90
G1 X250 Y364 Z5 F9000
M117 Nozzle heating...
M109 S200
G91
G1 Z11.5 F300
G90
M106 S255
M104 S130
M117 Clean nozzle
G1 X217 Y363 F9000
G1 Z1.7 F300
G1 X254 F4500
G1 Y363 X226
G1 Y363 X247
G1 Y363 X226
G1 Y363 X247
G1 Y363 X226
G1 Y363 X247
G1 Y363 X226
G1 Y363 X247
G1 Y363 X226
G1 Y363 X227
G1 Y359 X226
G1 Z1.7
G1 Y363 X226
G1 Y360 X228
G1 Y363 X228
G1 Y360 X230
G1 Y363 X232
G1 Y360 X234
G1 Y363 X236
G1 Y360 X238
G1 Y363 X240
G1 Y360 X242
G1 Y363 X226
G1 Y360 X228
G1 Y363 X228
G1 Y360 X230
G1 Y363 X232
G1 Y360 X234
G1 Y363 X236
G1 Y360 X238
G1 Y363 X240
G1 Y360 X242
G1 Y363 X226
G1 Y360 X228
G1 Y363 X228
G1 Y360 X230
G1 Y363 X232
G1 Y360 X234
G1 Y363 X236
G1 Y360 X238
G1 Y363 X240
G1 Z20
M400
M117 Clean Finish
M109 S130
M107
G91
G1 Z11.5 F300
G90
G28 Z0
| SV08_Brush_Scrubber.stl | 46.4KB |
