Suzuki Swift Sport ZC32 Phone Stand-wireless Charger 3D Printer Model
The file 'Suzuki Swift Sport ZC32 Phone Stand-wireless Charger 3D Printer Model' is (ipt,stl) file type, size is 802.7KB.
The file 'Suzuki Swift Sport ZC32 Phone Stand-wireless Charger 3D Printer Model' is (ipt,stl) file type, size is 802.7KB.
Replacement part for the Suzuki Swift Sport 2010-2017 ZC32
Wireless charger I used was 74mm width x 11mm thick
Push out the bottom if needed to align with the phone coils.
Had to modifie my charger but changed it in the design later.
You also can fit a smaller wirelsss charger coil behind it instead.
Or modify the drawings for your own purpose.
Maximum width is 77.5mm for the phone.
Made it for a S24 with TPU case.
Painted it with black and a thin layer of anthracite.
Charger
(pictures are before making some adjustments on the design
Cambered side is necessy to get it over the handbrake whil already fitted in the panel.
Also prevents Phone from sliding)
IPT Drawing is messy ;)
Action Store: Re-load wireless charger
Re-Load usb-c 12V adaptor.
Blokker store: Soundlogic Phone holder
| Suzuki_Swift_sportZC32_wirelsss_charger.ipt | 815.5KB | |
| Suzuki_Swift_sportZC32_wirelsss_charger.stl | 126.3KB |
