Any donations are greatly appreciated and help me towards creating more things! :)

Feel free to print these files for yourself or get them printed through specific services like 3Dhubs. Please don't support the illegitimate eBay sellers that stole the design! If you use these files, I would really love to see pictures of it or hear about it. Also if there are any questions feel free to ask.

Disclaimer:
Finally uploaded these files again after a lot of reconsideration. These took a lot of time to create and perfect and as most of you are aware of, we're also stolen by others and offered on eBay without any credits to make profit. This kind of made me sad and reluctant to upload the files again, but after a lot of emails I decided to re-upload the files to help out the community and make those SV's prettier

Description/manual:
These infills are replacement infills for the second generation SV650/SV1000 motorcycles and should fit perfectly.

Print the left and right infill file as is. (I mean upright.) This requires the least amount of support and the strongest part. You have to turn the holders 90 degrees, but these can be printed without support material. Please see the Slic3r picture if i'm not clear.

This new version doesn't need any washer anymore. :) The only thing you will need are the original large bolts and 4x m4X10 bolts and nuts.

The middle part is split on purpose for easier printing on smaller printers, but mainly, because I noticed that not every subframe/fairing is 100% the same. So by doing it this way and by making it possible to slide the nuts left and right, you can make it fit perfectly flush on almost every bike.

Print settings:
For strength and durability use materials like PETG.
3 perimeters or more is highly recommended.
20% infill minimum
Support is needed for the infills, but only a really small amount and you won't see it.
Layer height: 0.2mm or lower for optimal results.

I hope people can enjoy the files, but most importantly enjoy their motorcycle. Happy riding!

These files are designed by me (Zynex) and Mengineer. For more information please see the topic on SVrider. They are all licensed as non commercial.