The file 'Survivor Standing Ellipse Puzzle 2 3D Printer Model' is (stl) file type, size is 707.0KB.
As Seen on Survivor S45Ep1. If you want your print to look like mine, you want to print everything on its back and change the filament at each height that the design changes. DO NOT PRINT AT CURRENT SCALE, PRINT ALL PIECES PROPORTIONALLY AT A SCALE THAT WORKS FOR YOUR PRINTER SETTINGS.
| SE2_base.stl | 18.5KB | |
| SE2_part1.stl | 70.5KB | |
| SE2_part10.stl | 48.7KB | |
| SE2_part11.stl | 47.4KB | |
| SE2_part12.stl | 72.4KB | |
| SE2_part13.stl | 94.5KB | |
| SE2_part14.stl | 137.0KB | |
| SE2_part15.stl | 45.3KB | |
| SE2_part16.stl | 62.5KB | |
| SE2_part17.stl | 55.0KB | |
| SE2_part18.stl | 40.3KB | |
| SE2_part19.stl | 173.4KB | |
| SE2_part2.stl | 61.7KB | |
| SE2_part20.stl | 54.0KB | |
| SE2_part21.stl | 60.5KB | |
| SE2_part22.stl | 83.8KB | |
| SE2_part23.stl | 64.0KB | |
| SE2_part24.stl | 61.5KB | |
| SE2_part25.stl | 106.4KB | |
| SE2_part26.stl | 52.1KB | |
| SE2_part27.stl | 103.7KB | |
| SE2_part28.stl | 94.8KB | |
| SE2_part29.stl | 68.6KB | |
| SE2_part3.stl | 131.8KB | |
| SE2_part30.stl | 84.6KB | |
| SE2_part31.stl | 68.8KB | |
| SE2_part4.stl | 83.2KB | |
| SE2_part5.stl | 96.7KB | |
| SE2_part6.stl | 75.1KB | |
| SE2_part7.stl | 119.0KB | |
| SE2_part8.stl | 107.5KB | |
| SE2_part9.stl | 84.8KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
