Survivor Skeleton Fish Puzzle 3D Printer Model
The file 'Survivor Skeleton Fish Puzzle 3D Printer Model' is (stl) file type, size is 92.7KB.
The file 'Survivor Skeleton Fish Puzzle 3D Printer Model' is (stl) file type, size is 92.7KB.
As Seen on Survivor S22Ep13 andS24Ep13. If you want your print to look like mine, you will need to use a software and printer that allow for multicolor printing. Color basePart2 and a little bit along parts 13-18 all the same color(red) while keeping the rest of the piece white, and print 2 of each of the parts13-18(1 for each side of the fish). Do the same thing with the color yellow for basePart4 and parts 7-12. Do the same thing with the color green for basePart6 and parts 1-6. Print basePart3 and basePart5 white, and change the color of the filament used for baseParts1 and 7 when the design changes(I did blue to white to blue). DO NOT PRINT AT CURRENT SCALE, PRINT ALL PIECES PROPORTIONALLY AT A SCALE THAT WORKS FOR YOUR PRINTER SETTINGS.
| FS_basepart1.stl | 39.2KB | |
| FS_basepart2.stl | 82.3KB | |
| FS_basepart3.stl | 18.1KB | |
| FS_basepart4.stl | 64.9KB | |
| FS_basepart5.stl | 18.8KB | |
| FS_basepart6.stl | 67.1KB | |
| FS_basepart7.stl | 61.2KB | |
| FS_part_1.stl | 5.2KB | |
| FS_part_10.stl | 5.4KB | |
| FS_part_11.stl | 5.4KB | |
| FS_part_12.stl | 5.6KB | |
| FS_part_13.stl | 5.6KB | |
| FS_part_14.stl | 5.6KB | |
| FS_part_15.stl | 5.6KB | |
| FS_part_16.stl | 5.6KB | |
| FS_part_17.stl | 5.6KB | |
| FS_part_18.stl | 5.6KB | |
| FS_part_2.stl | 5.2KB | |
| FS_part_3.stl | 5.4KB | |
| FS_part_4.stl | 5.4KB | |
| FS_part_5.stl | 5.4KB | |
| FS_part_6.stl | 5.4KB | |
| FS_part_7.stl | 5.4KB | |
| FS_part_8.stl | 5.4KB | |
| FS_part_9.stl | 5.4KB |
