The file 'Survivor Hanging Fish Puzzle 3D Printer Model' is (stl) file type, size is 182.2KB.
As Seen on Survivor S39Ep3 and S42Ep4. If you want your print to look like mine, you want to print everything in it's natural orientation and change the filament at each height that the design changes. To hang, tie a rope to the tail as shown in the above image. DO NOT PRINT AT CURRENT SCALE, PRINT ALL PIECES PROPORTIONALLY AT A SCALE THAT WORKS FOR YOUR PRINTER SETTINGS.
| HF_part1.stl | 15.3KB | |
| HF_part10.stl | 39.3KB | |
| HF_part11.stl | 77.4KB | |
| HF_part12.stl | 28.8KB | |
| HF_part13.stl | 103.0KB | |
| HF_part14.stl | 45.8KB | |
| HF_part15.stl | 41.5KB | |
| HF_part16.stl | 61.2KB | |
| HF_part17.stl | 39.1KB | |
| HF_part18.stl | 22.2KB | |
| HF_part19.stl | 45.9KB | |
| HF_part2.stl | 32.3KB | |
| HF_part20.stl | 61.7KB | |
| HF_part21.stl | 30.7KB | |
| HF_part22.stl | 9.3KB | |
| HF_part23.stl | 12.4KB | |
| HF_part3.stl | 11.4KB | |
| HF_part4.stl | 25.7KB | |
| HF_part5.stl | 21.4KB | |
| HF_part6.stl | 68.8KB | |
| HF_part7.stl | 19.6KB | |
| HF_part8.stl | 26.1KB | |
| HF_part9.stl | 63.6KB |
