The file 'Survivor Dragon Puzzle 2 3D Printer Model' is (stl) file type, size is 403.0KB.
As Seen on Survivor S28Ep1, S31Ep3, S40Ep2, and S42Ep1. If you want your print to look like mine, you want to print 2 of each piece(excluding floor1+2 and part2a+b,3a+b, and 6a+b), print everything with the design facing upwards, and change the filament at each height that the design changes. Than print 54 pegs to connect each face to one another. DO NOT PRINT AT CURRENT SCALE, PRINT ALL PIECES PROPORTIONALLY AT A SCALE THAT WORKS FOR YOUR PRINTER SETTINGS.
| DP_base.stl | 564.5KB | |
| DP_floor.stl | 2.6KB | |
| DP_floor2.stl | 2.6KB | |
| DP_part1.stl | 23.9KB | |
| DP_part10.stl | 33.6KB | |
| DP_part11.stl | 24.2KB | |
| DP_part12.stl | 33.8KB | |
| DP_part13.stl | 19.2KB | |
| DP_part14.stl | 24.4KB | |
| DP_part15.stl | 5.9KB | |
| DP_part16.stl | 28.1KB | |
| DP_part17.stl | 25.3KB | |
| DP_part18.stl | 17.0KB | |
| DP_part19.stl | 21.3KB | |
| DP_part2.stl | 33.4KB | |
| DP_part20.stl | 26.3KB | |
| DP_part21.stl | 12.9KB | |
| DP_part22.stl | 35.5KB | |
| DP_part23.stl | 19.9KB | |
| DP_part24.stl | 21.1KB | |
| DP_part25.stl | 26.5KB | |
| DP_part26.stl | 8.9KB | |
| DP_part27.stl | 17.6KB | |
| DP_part28.stl | 32.2KB | |
| DP_part29.stl | 8.7KB | |
| DP_part2b.stl | 48.8KB | |
| DP_part3.stl | 18.4KB | |
| DP_part30.stl | 9.4KB | |
| DP_part31.stl | 14.3KB | |
| DP_part32.stl | 13.4KB | |
| DP_part33.stl | 13.2KB | |
| DP_part34.stl | 10.6KB | |
| DP_part35.stl | 11.6KB | |
| DP_part36.stl | 30.7KB | |
| DP_part37.stl | 21.6KB | |
| DP_part38.stl | 19.2KB | |
| DP_part39.stl | 9.3KB | |
| DP_part3b.stl | 50.9KB | |
| DP_part4.stl | 38.7KB | |
| DP_part40.stl | 10.8KB | |
| DP_part41.stl | 49.0KB | |
| DP_part42.stl | 18.3KB | |
| DP_part43.stl | 27.2KB | |
| DP_part44.stl | 19.7KB | |
| DP_part45.stl | 11.8KB | |
| DP_part46.stl | 3.4KB | |
| DP_part47.stl | 5.0KB | |
| DP_part48.stl | 8.3KB | |
| DP_part49.stl | 5.4KB | |
| DP_part5.stl | 40.2KB | |
| DP_part50.stl | 21.0KB | |
| DP_part6.stl | 87.0KB | |
| DP_part6b.stl | 45.3KB | |
| DP_part7.stl | 32.5KB | |
| DP_part8.stl | 25.4KB | |
| DP_part9.stl | 7.5KB | |
| DP_peg.stl | 684.0B |
