The file 'Survivor Aligned Planks Puzzle 7 3D Printer Model' is (stl) file type, size is 263.0KB.
As Seen on Survivor S35Ep10. If you want your print to look like mine, you want to print everything in it's natural orientation and change the filament at each height that the design changes. DO NOT PRINT AT CURRENT SCALE, PRINT ALL PIECES PROPORTIONALLY AT A SCALE THAT WORKS FOR YOUR PRINTER SETTINGS.
| AP5_part1.stl | 8.1KB | |
| AP5_part10.stl | 20.3KB | |
| AP5_part11.stl | 40.2KB | |
| AP5_part12.stl | 68.6KB | |
| AP5_part13.stl | 73.9KB | |
| AP5_part14.stl | 6.7KB | |
| AP5_part15.stl | 57.1KB | |
| AP5_part16.stl | 21.6KB | |
| AP5_part17.stl | 53.4KB | |
| AP5_part18.stl | 78.2KB | |
| AP5_part19.stl | 73.1KB | |
| AP5_part2.stl | 5.0KB | |
| AP5_part20.stl | 14.3KB | |
| AP5_part21.stl | 81.9KB | |
| AP5_part22.stl | 25.1KB | |
| AP5_part23.stl | 46.2KB | |
| AP5_part24.stl | 46.0KB | |
| AP5_part25.stl | 52.4KB | |
| AP5_part26.stl | 61.6KB | |
| AP5_part27.stl | 884.0B | |
| AP5_part28.stl | 39.3KB | |
| AP5_part29.stl | 29.8KB | |
| AP5_part3.stl | 32.7KB | |
| AP5_part30.stl | 17.5KB | |
| AP5_part31.stl | 15.3KB | |
| AP5_part32.stl | 22.9KB | |
| AP5_part33.stl | 8.3KB | |
| AP5_part4.stl | 43.2KB | |
| AP5_part5.stl | 41.0KB | |
| AP5_part6.stl | 22.5KB | |
| AP5_part7.stl | 33.0KB | |
| AP5_part8.stl | 44.8KB | |
| AP5_part9.stl | 29.8KB |
