SureFeed Microchip Pet Feeder Shallow Raised Bowl 3D Printer Model
The file 'SureFeed Microchip Pet Feeder Shallow Raised Bowl 3D Printer Model' is (stl) file type, size is 49.3KB.
The file 'SureFeed Microchip Pet Feeder Shallow Raised Bowl 3D Printer Model' is (stl) file type, size is 49.3KB.
A friend of mine has a particularly picky cat that needed a raised bowl without sharp corners that “trap” food. I know what you're thinking, “classic cat”, am I right?
Anyway, I am always happy to help. There was already a design here by
The_AstroHighlander for her particular feeder, though that one had some printability issues. I modified it to raise the bottom a bit, aggressively slope the inside so that food falls to the center, and adjust the sides to that no supports are necessary to print it. This bowl fits half a cup of dry food.
If you need this very oddly specific bowl… I guess you are welcome.
You can use any print settings you'd like. I used 0.2mm layer height, and also 20% lightning infill.
| surefeed_bowl_shallow.stl | 148.1KB |
