SUPRFRK 100 Mm Brushed Motor, Ducted, Drone Frame 3D Printer Model
The file 'SUPRFRK 100 Mm Brushed Motor, Ducted, Drone Frame 3D Printer Model' is (stl) file type, size is 3.1MB.
The file 'SUPRFRK 100 Mm Brushed Motor, Ducted, Drone Frame 3D Printer Model' is (stl) file type, size is 3.1MB.
SUPRFRK 100mm Brushed Motor Frame
Available for sale here: http://www.rockstaralchemist.com/product/suprfrk-100mm-brushed-motor-frame
The SUPRFRK is a 3D printed, brushed, and ducted drone frame compatible with the Micro SciSky 32-bit Flight Controller and 8.5 mm motors (not included). Allows for CleanFlight flight controller programming on a brushed system. The motor mounts are printed in Ninjaflex which is a highly flexible thermoplastic urethane (TPU).
Colors:
Argon: Purple Frame/Yellow Motor Mounts
Ferric: Orange Frame/Yellow Motor Mounts
Carbon: Black Frame/Black Mounts (not carbon fiber)
Aurum: Yellow Frame/Black Mounts
Specs:
Size: 100 mm (diagonal, motor center to motor center)
Motors: 8.5 x 20 mm brushed (recommended)
Flight Controller: Micro SciSky 32-bit (recommended)
Props: 56 mm (recommended)
AUW: 69 grams (w/480 mAh LiPo)
Includes:
-Frame
-Motor Mounts (mounted)
-Camera Mount (mounted)
-Hardware (screws, battery strap)
Needed to complete:
-Motors
-Micro Cam/VTX
-Flight Controller
-Propellers
-Lipo
-and whatever else I forgot
| 8.5mmMotorGrommet.stl | 1.4MB | |
| 8.5mmMotorLandingSkid.stl | 1.1MB | |
| LandingGrommet.stl | 2.5MB | |
| SUPRFRK.stl | 3.3MB |
