Support Test Piece 3D Printer Model
The file 'Support Test Piece 3D Printer Model' is (stl) file type, size is 113.79 KB.
The file 'Support Test Piece 3D Printer Model' is (stl) file type, size is 113.79 KB.
This is a small test piece I made to use when playing about with support settings. I don't want to print a large item, only to find my supports are no good.
I originally printed out a part with counterbores & when I came to remove the support material, it was fused to the part.
This part is fairly compact 35 x 30 x 12 (Z) and printed in around an hour at 0.2mm layer height for me.
It has a standard clearance counterbore for an M6 cap head, a flat roof section (6mm from the bed), a 45 degree overhang & radiused curve with increasing overhang.
I decided that these are most of the scenarios I would likely encounter where support would be necessary.
Obviously, you will need to rotate this part in your slicer so the flat 'top' is the top piece of your print & the void features that require support will be against the print bed.
If you use this & find it useful, please upload a pic using 'I Made One' to show how your supports come out. Thanks.
| support_test_piece.stl |
