Support Test 3D Printer Model
The file 'Support Test 3D Printer Model' is (stl) file type, size is 540.0B.
The file 'Support Test 3D Printer Model' is (stl) file type, size is 540.0B.
My supports have been sticking to my prints and I was sick of it. So been messing around with the support settings and thought this would help other people. Created a box with two cutouts in it. I loaded different settings for each test to figure out what works for me(yours will be different).
The settings you want to mess around with are the "Top distance," "Bottom distance," "Top thickness," "Bottom thickness," and "X/Y distance"
Support top distance - the distance between the top support and the beginning of the print
Support bottom distance - the distance between the print and the bottom of the supports
Support top thickness - the thickness of the top layers of the supports
Support bottom thickness - the thickness of the bottom layers of the supports
Support X/Y distance - the distance between the print and the supports on the x/y axis
I did multiple prints to find the perfect settings. Hope this helps
| Support_Test_v2.stl | 2.0KB |
