Support hook for a manual tire changer.
Makes it less difficult to change tires when the tool is clamped down to something. I use a small table to clamp it on.
There are a few manual tire changers with similar design so maybe these hooks fits other models.
You have to print this very strong. I have printed it in ABS, 5 perimeter layers and 50% infill.
I use 3 M6 wing screws and 3 t-nuts for wood.
Design and idea by dara:
http://www.thingiverse.com/dara/about
| support_hook_bird_35_mm_v5.stl | 225.5KB |
