Supply Card Deck And Discard Pile Holders 3D Printer Model
The file 'Supply Card Deck And Discard Pile Holders 3D Printer Model' is (STL) file type, size is 1.0MB.
The file 'Supply Card Deck And Discard Pile Holders 3D Printer Model' is (STL) file type, size is 1.0MB.
These card deck holders are designed to stack up with the goal of making games like Firefly more organized and compact.
The Firefly cards are 2.5"x3.5", and the larges pile is ~0.65" in height.
These holders are designed so that 2 sections can stack up for playing. When finished the 2 sections can then become a case for the deck of cards.
I've included files to make card holders that are 1, 2, 3, 4, or 5 decks long.
Sorry for the rotated STL files!
4/22/15 - Printed on set last night and it's got problems. The tolerance on the pins is too tight. And the pins are snapping off. I think I'm going to update the drawing so that instead of printing the pins, you'll have to embed a 2.5mm metal pin in afterwards.
| Card_Deck_Holder_1_wide.STL | 137.5KB | |
| Card_Deck_Holder_1_wide_no_pins.STL | 137.5KB | |
| Card_Deck_Holder_2_wide.STL | 274.9KB | |
| Card_Deck_Holder_2_wide_no_pins.STL | 274.9KB | |
| Card_Deck_Holder_3_wide.STL | 412.3KB | |
| Card_Deck_Holder_3_wide_no_pins.STL | 412.3KB | |
| Card_Deck_Holder_4_wide.STL | 549.7KB | |
| Card_Deck_Holder_4_wide_no_pins.STL | 549.7KB | |
| Card_Deck_Holder_5_wide.STL | 687.1KB | |
| Card_Deck_Holder_5_wide_no_pins.STL | 687.1KB | |
| SidePost.STL | 43.6KB | |
| SidePost_No_Pins.STL | 44.8KB |
