SuperGirl / SuperMan And Flash Cupcake Toppers 3D Printer Model
The file 'SuperGirl / SuperMan And Flash Cupcake Toppers 3D Printer Model' is (stl) file type, size is 43.1KB.
The file 'SuperGirl / SuperMan And Flash Cupcake Toppers 3D Printer Model' is (stl) file type, size is 43.1KB.
Birthday cupcake toppers.
Update: 11/11/17 My daughter informed me that Supergirl and Superman logos are different. Superman yellow sections are solid- no blue on the inside. So here is the superman correction 'Yellow superman section'. I have not printed it. Might need slight filing/sanding to get to fit as supergirls are slights flexible and these won't be. Let me know if you need a slight adjustment. As always, please share you prints with pictures! And be the first to print this one!
SuperGirl logo printed in 3 parts and press-fit together. A drop of glue here and there might be good.
Brim needed for the yellow parts. The smallest one is hard to put in without dropping a few times. I put them in slightly then turn it over and pressed down to finish up
If needed, I used the Slic3r 'fix' for 'watertightness' (yellow parts needed it)
Brim also needed on the flash symbol for a better print. I didn't on this version, but will on the others.
| Blue_side.stl | 16.8KB | |
| Flash_Symbol.stl | 92.9KB | |
| Red_Section.stl | 14.1KB | |
| Yellow_Section.stl | 31.4KB | |
| Yellow_Superman_Section.stl | 21.2KB |
