My super simple version of HexaLeaf/NanoLeaf lamp.
Printed with PLA at 0.2 layer height.100% infill, no support, no brim.
Demo Effect 1
Demo Effect 2
Demo Effect 3
I have not placed any wholes in the base so it can be arranged in any way, then the wholes need to be drilled for the interconnecting cables. I glued the pieces together with CA glue.
I cut a WS2812B LED Strip into pieces and glued them in place, then connected them with wires. The face plates are simply press fit in place.
I used [ESP-01 microcontroller](https://www.banggood.com/Upgraded-Version-1M-Flash-ESP8266-ESP01-WIFI-Transceiver-Wireless-Module-p-979509.html?p=8Q2413595967201405P9 as its small enough to fit inside the base and powered it from a USB Power Bank through a tiny 3.3v power supply that is also fitted inside the base.
I programmed the ESP-01 microcontroller with WLED firmware so it allows a huge selection of patterns.
| HexaLeaf_base_TC.stl | 3.4KB | |
| HexaLeaf_face_TC.stl | 2.2KB |
