The file 'Super Pi Boy – Raspberry Pi 3 Game Boy 3D Printer Model' is (stl) file type, size is 2.3MB.
This is the Super Pi Boy!
It's built around the Raspberry Pi 3 single board computer, making it a seriously powerful device!
It runs Retropie which provides a wide variety of emulators, all the way from the first Atari console to the Game Boy Advance, Nintendo 64, Dreamcast and everything in between!
It also features a 3.5" TFT LCD with a resolution of 480 X 320, and a built-in speaker which you can turn on and off using the switch on the side.
Because the Raspberry Pi 3 is equipped with a full-size HDMI port you can also play on a full sized tv - especially handy for multiplayer games!
The built-in controller is connected through the GPIO and configured using the Adafruit Retrogame script.
I really hope you enjoy building your own! :D
Here are all the parts:
Raspberry Pi 3:
https://www.adafruit.com/product/3055
Adafruit 3.5" tft display:
https://www.adafruit.com/product/913
2500 mah battery:
https://www.adafruit.com/product/328
Tactile switches:
https://www.adafruit.com/products/1489
ON/OFF Switch(Main):
https://www.adafruit.com/products/917
ON/OFF Switch(Audio):
https://www.adafruit.com/products/805
PAM8302 Amplifier:
https://www.adafruit.com/products/2130
Mini Metal speaker:
https://www.adafruit.com/products/1890
PowerBoost 1000C:
https://www.adafruit.com/products/2465
(Ultra) Micro SD 32 GB:
I'm sure you know where to get an sd card ;)
Video: https://youtu.be/_vMHeCARaYg
A_B_X_Y.stl | 3.1MB | |
Back.stl | 7.4MB | |
Buttons.stl | 4.8MB | |
Extras.stl | 3.2MB | |
Front.stl | 8.0MB |