Super Game PiSP 3D Printer Model
The file 'Super Game PiSP 3D Printer Model' is (123dx,stl,gcode) file type, size is 14.1MB.
The file 'Super Game PiSP 3D Printer Model' is (123dx,stl,gcode) file type, size is 14.1MB.
When I first saw the PiGRRL released by Adafruit I knew that I had to build one, but I wanted to tweak it a little, then part way through my design process Adafruit upped their game and released the [Super Game Pi]( http://www.thingiverse.com/thing:629873 )!
But I had a problem, it was too large for my Printrbot! D:
So I designed this, my version of the Super Game Pi , which I call the Super Game PiSP, because I based the basic shape off of the PSP.
I had a few things in mind making it, namely:
So with those in mind I created this!
The electronics and setup are nearly identical to the guide for the Super Game Pi https://learn.adafruit.com/super-game-pi , except I used a Pi B+ , and tac switches instead of a hacked up game pad
I'll post more detailed information later, but I want to get this released before I head to work! ( More detailed information now available on the instructions page, as well as pictures of the internals )
Inspired by, but not directly derived from the Super Game Pi ( used it as reference for quite a few measurements )
| Left_Bottom.123dx | 348.2KB | |
| Left_Bottom.stl | 22.4MB | |
| Left_Top.123dx | 401.8KB | |
| Left_Top.stl | 14.7MB | |
| MB.gcode | 2.5MB | |
| Middle_Bottom.123dx | 298.3KB | |
| Middle_Bottom.stl | 17.7MB | |
| Middle_Top.123dx | 328.2KB | |
| Middle_Top.stl | 7.9MB | |
| MT.gcode | 2.2MB | |
| Right_Bottom.123dx | 277.6KB | |
| Right_Bottom.stl | 9.1MB | |
| Right_Top.123dx | 408.3KB | |
| Right_Top.stl | 13.7MB | |
| Start-Select_Buttons.123dx | 161.7KB | |
| Start-Select_Buttons.stl | 1.2MB | |
| SuperGamePiSP_R1.123dx | 1.2MB |
