Hello!
This is an educational Arduino set I've prepared for my nieces to teach them about electronics. While I was at it - I decided to also make it Open Source and publish it on the internet for free!
You need a 3D printer to print all the plastic elements.
Youtube video:
https://youtu.be/yBgqDcDxOuM
Arduino project hub:
https://create.arduino.cc/projecthub/bzqp/super-bot-gears-a-3d-printed-arduino-starter-kit-91485e
| 1x_base.stl | 37.2KB | |
| 1x_base_adapter.stl | 85.8KB | |
| 1x_beam_constrained.stl | 50.9KB | |
| 1x_beam_free.stl | 54.2KB | |
| 1x_claw.stl | 23.8KB | |
| 1x_double_beam.stl | 56.5KB | |
| 1x_eyes.stl | 30.0KB | |
| 1x_flower.stl | 430.4KB | |
| 1x_gripper.stl | 45.2KB | |
| 1x_gripper_adapter.stl | 29.7KB | |
| 1x_joystick.stl | 42.5KB | |
| 1x_knob.stl | 131.1KB | |
| 1x_loops.stl | 11.4KB | |
| 2x_hinge.stl | 21.0KB | |
| 6x_washer_optional.stl | 9.5KB |
