Sunlu S2 Horizontal Bowden Tube Port 3D Printer Model
The file 'Sunlu S2 Horizontal Bowden Tube Port 3D Printer Model' is (f3d,step,stl) file type, size is 846.3KB.
The file 'Sunlu S2 Horizontal Bowden Tube Port 3D Printer Model' is (f3d,step,stl) file type, size is 846.3KB.
I built a mount for my filament dryer to hold on to my 3d printer, then I needed a way to use the filament right from the dryer.
I built this nozzle that holds on to the lid of the dryer. (The dryer lid was meant to have holes in it but the filament was supposed to pull straight up. With this port it uses the same holes, but comes straight out the side).
I made it cool looking, I even did a fancy hole that was made to hold the blue tube that came with the dryer. My fancy hole in the front of the nozzle ened up printing way too big. I was going to resize it, but since the predrilled hole in the dryer is sticking up, when the blue tube is sticking through the hole and through my nozzle attachment, the blue tube gets wedged in perfectly.
I printed it out of PETG (to handle heat, but wasn't necessary), and used double sided tape to hold my nozzle attachment on (3m 1/2-5-RP32 VHB, It holds great).
The print doesn't need any supports.
I included the fusion 360 file if you want to modify anything. (If you do, I apologize for my sloppy timeline. I was kinda innovating as I was designing).
| SunluExtruder_v7.f3d | 847.2KB | |
| SunluExtruder_v7.step | 264.5KB | |
| SunluExtruder_v7.stl | 168.6KB |
