Filament guide with roller bearing for Sunlu FilaDryer s2.
Press the outer ring onto the bearing using a vise or clamp.
Place the bearing in the base, place cover over it, then press the axle in place using a vise or clamp.
Attach the roller to the filament dryer using glue or double sided tape.
The bearing used is an NTN 6000z bearing.
Drill and countersink hole in top of Lack enclosure. Insert filament guide and hold in place using the nut.
| Axle2.STL | 18.1KB | |
| Base2.STL | 345.1KB | |
| BaseDryer.STL | 77.5KB | |
| Cover2.STL | 25.8KB | |
| Cover3.STL | 18.0KB | |
| Nut.STL | 166.8KB |
