The bearing blocks are designed to work with flanged 608 z bearings . they work great with the ACME lead screws provided with this kit .
If you have problems with z wobble i do recommend this mod. You should also replace the inner smooth rod mounts for the x axis as this will eliminate any play on the x carriage , thus making this printer very stiff and a joy to print with .
If you want to see the print quality that i get with this printer now check this out
https://www.youtube.com/watch?v=--0bgcz_bEw
The cooling fan duct for PLA needs some rework as it does not provide enough cooling for smaller parts. I will upload this part after i redesign it .
Thanks .
| belt_clip.stl | 1.6KB | |
| bottom_z_axis_bearing_block_rescaled.stl | 366.2KB | |
| fan_duct_sunhokey_2.stl | 420.3KB | |
| sunhokey_fan_hot_end.stl | 67.3KB | |
| top_z_axis_bearing_block.STL | 142.9KB | |
| x_axis_1.stl | 13.9KB | |
| x_axis_2.stl | 13.9KB | |
| z_8_mm_smooth_rod_bottom_.stl | 9.3KB |
