Sunder Omnimech 3D Printer Model
The file 'Sunder Omnimech 3D Printer Model' is (stl,blend) file type, size is 33.0MB.
The file 'Sunder Omnimech 3D Printer Model' is (stl,blend) file type, size is 33.0MB.
General Updates:
Updated to fix jump jets on SD1-OE
Contains both .blend, .stl and baseless (B-).stl files for the primitive Reconquista. Use .Blend files to customise the pose or the base file to make a custom variant.
I use a resin printer so I do not know how well it will work if a filament printer is used, but always make sure parts are supported. For resin printing, a lift height of 8mm above a platform allows for full drainage out of the hexbase.
You can request if you want me to make a specific miniature (although there is no timeline on when it will be completed), or support at the second tier or higher on the Patreon for a custom design.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
| B-SunderO.stl | 2.5MB | |
| B-SunderOA.stl | 2.4MB | |
| B-SunderOB.stl | 4.0MB | |
| B-SunderOC.stl | 5.6MB | |
| B-SunderOD.stl | 2.2MB | |
| B-SunderOE.stl | 2.4MB | |
| B-SunderOF.stl | 3.5MB | |
| B-SunderOG.stl | 2.0MB | |
| B-SunderOR.stl | 2.6MB | |
| B-SunderOX.stl | 4.0MB | |
| Sunder.blend | 3.9MB | |
| SunderO.blend | 4.2MB | |
| SunderO.stl | 2.5MB | |
| SunderOA.blend | 4.0MB | |
| SunderOA.stl | 2.4MB | |
| SunderOB.blend | 5.4MB | |
| SunderOB.stl | 4.0MB | |
| SunderOC.blend | 7.4MB | |
| SunderOC.stl | 5.7MB | |
| SunderOD.blend | 3.9MB | |
| SunderOD.stl | 2.2MB | |
| SunderOE.blend | 4.3MB | |
| SunderOE.stl | 2.4MB | |
| SunderOF.blend | 4.5MB | |
| SunderOF.stl | 3.5MB | |
| SunderOG.blend | 4.0MB | |
| SunderOG.stl | 2.0MB | |
| SunderOR.blend | 4.4MB | |
| SunderOR.stl | 2.6MB | |
| SunderOX.blend | 4.4MB | |
| SunderOX.stl | 4.0MB |
