This is supposed to look like a thing called a "Databox" from the game Subnautica. Subnautica, if you are unaware of it, is an underwater survival game, and the databox when interacted with will give you a blueprint to create a helpful item.

INSTRUCTIONS:

1. You will find 6 pieces on the board, get the middle piece first.
2. Now use the 2 "L" shaped pieces and place the pegs into the crevasses of the 1st piece.
3. Now use the pieces opposite of the "L" things and place their pegs into the holes of the
   "L" things. (The pegs might not work, so if they don't cut them off and glue the pieces
   together)
4. Lastly, snap the final piece into place in the middle of the model.

INSERTING THE MICRO-SD:

in the last piece you put on there should be a little slit where you can slide a micro-SD card into.

Also, sorry the image is so blurry, obviously this is my first creation and I'm apparently not good at this.

CREDITS:

credit to subnautica-history.fandom.com for the image, if you are the rightful owner of this image and you would like me to remove it, please e-mail me at [email protected] if I do not respond please give me up to a month for a response also you may comment on the project. (I don't really check my email unless I'm looking for some kind of steam update)

(6:18PM 6/5/2024)
UPDATE No.1:

-Alright, I just printed this, and I realized my printer makes 5 base layers automatically and that really screws up the model. So, in retaliation to this, I made a second model just in case you have the same or similar issues with your printer.
-And lastly, I realized that I cannot download the 3d files from the pictures and in order to download it, you must go to the files tab in this program and do a manual download.