Subaru Trunk Cover Latch Replacement 3D Printer Model
The file 'Subaru Trunk Cover Latch Replacement 3D Printer Model' is (STL) file type, size is 835.1KB.
The file 'Subaru Trunk Cover Latch Replacement 3D Printer Model' is (STL) file type, size is 835.1KB.
The right latch on the cover for the trunk in my 2004 Subaru finally failed, so I decided to bust out the calipers and print a replacement.
In order to remove the previous latch, I had to drill out the original rivet used to secure it.
Each side uses:
1x M4x16mm Socket Head Cap Screw
1x 4mm Flat Washer
1x M4x.7mm nut
I originally printed this in PLA as a mostly test fit, and hoping maybe it would stand up to the heat, and it warped severely in moderate (~70F) weather over the course of week. Currently seeing how PETG stands up, but ABS almost surely wouldn't have problems.
The logo may not be visible depending on your print settings and filament, so I included a version without.
| Left_Latch_v2.STL | 484.3KB | |
| Left_Latch_v2_w_logo.STL | 737.9KB | |
| Right_Latch_v2.STL | 484.1KB | |
| Right_Latch_v2_w_logo.STL | 737.8KB |
