Please check out new and cheaper $65 Sub33D 2.07 version with improved x-axis motor and idler mounts:
http://www.thingiverse.com/thing:1429273
Please check out video:
https://www.youtube.com/watch?v=YkrMPGtMW3M
Sub33D v2.06 sub $100 AUD recycled e-waste 3D printer
Print area 200W x 200D x 180H
High accuracy long life 604/605 bearing construction (No linear bearings)
10mm rods throughout design (stiffer, less vibration)
Ridged frame design (minimize frame flexing)
Designed to utilize recycled printer, PC and general e-waste components supplied by Substation 33
Component cost excluding recycled components under $100 AUD
Main purchased components:
Main recycled components:
Built and filmed on location:
Please check out the following Youtube video build sequence play list for detailed build instructions (still under construction):
https://www.youtube.com/watch?v=0eCutGJ9l7U&list=PLW8e88EbKrS9L1Py1hJ-ydUP7O0o1GQaK
| 2.5mm_heatbed_bearing_mount_v2.02.stl | 26.8KB | |
| 25mm_x_M6_tube_bush_2.01.stl | 14.1KB | |
| 2mm_heatbed_bearing_mount_v2.02.stl | 26.8KB | |
| 80mm_fan_mount_v2.01.stl | 9.1KB | |
| 8mm_plate_bed_bracket_v2.03.stl | 38.5KB | |
| belt_clip_v2.02.stl | 20.5KB | |
| Big_and_Small_Herring_Bone_Gear_Nuclear.stl | 1.0MB | |
| E3D_v6_Compact_Extruder_for_i3_Rework.zip | 921.1KB | |
| LCD_spacer_v2.01.stl | 12.8KB | |
| Psu_corner.stl | 11.6KB | |
| Ramps_slide_brackets_v1.01.stl | 187.9KB | |
| spool_45deg_base_v2.04.stl | 27.4KB | |
| sub33d_v2.06.01.skp | 8.0MB | |
| Sub33D_v2.06_material_info_and_dimensions.pdf | 514.2KB | |
| Sub33D_v2.06_printed_parts_list.pdf | 11.0MB | |
| x-axis_clamp_v2.03.stl | 10.6KB | |
| x-cable_mgmnt_v2.01.stl | 36.6KB | |
| x-carriage_2mm_spacer_v2.05.stl | 13.9KB | |
| x-carriage_v2.05.stl | 65.3KB | |
| x-endstop_v2.03.stl | 21.6KB | |
| x-idler_mount_v2.05.stl | 86.6KB | |
| x-motor_mount_v2.05.stl | 134.4KB | |
| y-axis_bracket_v2.03.stl | 34.8KB | |
| y-belt_clamp_v2.01.stl | 16.3KB | |
| y-endstop_v2.01.stl | 33.5KB | |
| y-idler_v2.02.stl | 21.8KB | |
| y-motor_mount_v2.02.stl | 22.4KB | |
| z-endstop_v2.03.stl | 22.9KB | |
| z-motor_mount_left_v2.01.stl | 70.2KB | |
| z-motor_mount_right_v2.01.stl | 87.2KB | |
| z-top_left_v2.01.stl | 57.1KB | |
| z-top_right_v2.01.stl | 74.4KB |
