1/35 semi scale model of a armored sub chaser "project 194" or "BMO" i am designing at the moment.
You might need to lengthen the Deck Cover a little bit, to fit it to your print.
The propeller is desinged for a M3x7x4 threaded brass insert.
I will add a more detailed description and additional parts later.
Video of the first test drive: https://www.youtube.com/watch?v=7N9FqS7qSv8
Realitätsnaher Nachbau eines U Boot Jägers Project 194, den ich zurzeit erstelle
Je nachdem, wie lang der Druck ist, muss man den Deckel noch etwas verlängern.
Für die Schiffsschraube benötigt man M3x7x4 Messing Gewinde Einsätze.
Eine detailliertere Beschreibung füge ich zu einem späteren Zeitpunkt hinzu.
March 01.2020
Added doors and a depth charge rack.
Print DC rack pt 1.stl four times and DC rack pt 2.stl and DC rack pt 3.stl two times.
March 29.2020
Changed doors and the box in front of the superstructure.
Added a "ladder" and the "siren"
Changed the model of the middle/main mast to a more detailed one.
March 31.2020
Added a searchlight, bollards and a lifebuoy.
| 127mm_1.1.stl | 105.0KB | |
| 127mm_1.2.stl | 36.3KB | |
| 127mm_2.1.stl | 135.2KB | |
| 127mm_2.2.stl | 46.6KB | |
| 127mm_2.3.stl | 72.9KB | |
| 37mm_gun_half.stl | 116.2KB | |
| 37mm_gun_mount.stl | 94.0KB | |
| 37mm_gun_shield.stl | 10.6KB | |
| 45mm_21-K_Pivot_1.stl | 110.1KB | |
| 45mm_21-K_Pivot_2.stl | 322.0KB | |
| 45mm_gun_half.stl | 182.9KB | |
| Anchor_winch.stl | 144.3KB | |
| Boat_Propeller_25mm.stl | 2.9MB | |
| bollard.stl | 239.1KB | |
| bollard_bow.stl | 138.2KB | |
| Bow_Cover.stl | 85.3KB | |
| box_bow.stl | 14.6KB | |
| box_middle.stl | 4.6KB | |
| DC_pt_1.stl | 144.6KB | |
| DC_pt_2.stl | 56.3KB | |
| DC_rack_pt_1.stl | 15.5KB | |
| DC_rack_pt_2.stl | 14.5KB | |
| DC_rack_pt_3.stl | 1.6KB | |
| deck_cover.stl | 26.4KB | |
| Deck_Cover_Part_1.stl | 22.2KB | |
| Deck_Cover_Part_2.stl | 14.7KB | |
| door_big.stl | 33.1KB | |
| door_small.stl | 21.4KB | |
| hatch.stl | 40.5KB | |
| hull.stl | 939.0KB | |
| Hull_Part_1+2.stl | 1.3MB | |
| Hull_Part_1.stl | 1.3MB | |
| Hull_Part_2.stl | 308.2KB | |
| Hull_Part_3.stl | 218.4KB | |
| Hull_Part_4.stl | 259.8KB | |
| Hull_Part_5.stl | 437.2KB | |
| Hull_Part_6.stl | 198.6KB | |
| ladder.stl | 4.4KB | |
| lifebuoy.stl | 1.4MB | |
| main_mast.stl | 213.8KB | |
| Mast_bow.stl | 192.7KB | |
| mast_middle_base.stl | 49.3KB | |
| Mast_stern.stl | 97.7KB | |
| Motor_Mount.stl | 1.0MB | |
| platform.stl | 183.6KB | |
| Roof_new.stl | 187.6KB | |
| searchl._pt.1.stl | 208.2KB | |
| searchl._pt.2.stl | 96.6KB | |
| Servo_Mount.stl | 44.9KB | |
| siren.stl | 85.0KB | |
| Stern_Cover.stl | 2.6KB | |
| stern_ramp.stl | 3.2MB | |
| Superstructure.stl | 70.2KB | |
| vent_big.stl | 4.3MB | |
| vent_small.stl | 3.7MB | |
| Wb._ramp.stl | 14.0KB |
![Planet Express Ship [Futurama] 3D Printer Model](https://res.3axis.co/d4e275f9-7ab8-4a0e-a2b7-fb750efcc831/images/42b070b9-9f5e-447e-9410-dbab0676d54c_thumb.jpg)
