Stug III G 1:56 Scale 3D Printer Model
The file 'Stug III G 1:56 Scale 3D Printer Model' is (stl) file type, size is 18.5MB.
The file 'Stug III G 1:56 Scale 3D Printer Model' is (stl) file type, size is 18.5MB.
Stug III is one of the most iconic vehicles made by WW2 Germany and was used in large numbers in all theatres. The G model was the most widely produced variant and when I saw the limited options available for this iconic vehicle, I decided to do my bit. TigerAce1945 had done some excellent work for a 1:100 scale Stug F so I decided to use that as a starting point (rather than start from scratch). I have extensively remodeled the original, in particular, remodeling the superstructure to match the G model, adding a new high detail track assembly, new tools and new light.
In addition to the Stug III G I have included the Stuh 42 barrel and the 'Pigs Snout' version for additional variety. These have been modeled so that you can fit a 5mm x 1mm magnet in each end to make the barrels interchangeable.
I recommend printing the tracks separately, but I have included a file with them attached for those that want to do it one go.
Credit to TigerAce1945 for creating the Stug F that I used as the basis for this rework. Modified in Blender by Matthew Devenish
| Barrel.stl | 134.1KB | |
| Saukopf_Barrel.stl | 266.5KB | |
| Stug_III_G_Hull_No_Barrel.stl | 14.8MB | |
| Stug_III_G_Hull_No_Barrel_No_MG.stl | 14.5MB | |
| Stug_III_G_Hull_No_Barrel_No_Tracks.stl | 1.8MB | |
| Stug_III_G_Hull_No_Barrel_No_Tracks_No_MG.stl | 1.5MB | |
| Stuh_42_Barrel.stl | 134.1KB | |
| Tracks_Left.stl | 6.5MB | |
| Tracks_Right.stl | 6.5MB |
