Strong Bike Phone Holder 3D Printer Model
The file 'Strong Bike Phone Holder 3D Printer Model' is (zip,stl) file type, size is 8.1MB.
The file 'Strong Bike Phone Holder 3D Printer Model' is (zip,stl) file type, size is 8.1MB.
I made this model because I couldn't find one that met all my criteria:
Fully 3D printable (No screws, glue, etc.),
Center mounting point,
Horizontal orientation,
Access to all ports and buttons,
Strong grip on both the phone and the handlebar,
Support-free printing.
Designed to fit standard 31.8mm (1.25") diameter MTB handlebars,
Can hold 65-80mm wide phones. (Pretty much all phone models are in this range.)
Easy to print/assemble/use, no supports/rafts/brims are required, no bridges or extreme overhangs.
There are two types of knob screws: the normal one and the stronger one. The normal one is a single piece part and it rotates more freely. The stronger one is… well, stronger.
Pay attention to your handlebar stem sizes. In my case there's plenty of room, but it might be too thick to fit on some bikes
The “All in One” models fit on a 15x15cm bed.
Originally uploaded on printables.com/model/886004
This is my first somewhat decent model. Please, leave your feedback if you liked it.
| Phone_Holder.zip | 3.5MB | |
| Phone_Holder_All_In_One_Normal_Knob.stl | 6.4MB | |
| Phone_Holder_All_In_One_Stronger_Knob.stl | 5.2MB |
