Strix Goblin Air Unit Mount 3D Printer Model
The file 'Strix Goblin Air Unit Mount 3D Printer Model' is (stl) file type, size is 24.4KB.
The file 'Strix Goblin Air Unit Mount 3D Printer Model' is (stl) file type, size is 24.4KB.
Very durable and secure camera mount, with airflow over the Air Unit and good antenna orientation. Rain could get into the usb port so I used some tape to cover it.
4 M2 screws and nuts are needed, to get the nuts in i used a screw to pul it in, pushing from the outside was too hard.
I located the hole locations with a single LED from the inside.
To get the camera precisely in the hole in the front I pushed it in from the outside and pured hot glue around it (last pic)
onshape link of this design:
https://cad.onshape.com/documents/4b437c1a970e1cb28b279cd8/w/f58c5e997c5b394a547947b3/e/40ac6d065d38ca6587e84861?renderMode=0&uiState=66f2b829403c2379fe5d1221
| AirUnitRev1.stl | 116.9KB |
