- UPDATE 12/12/2018

This wheel now has interchangeable rims :D you can find the other design following the link below. Have fun! ;)

Link: https://www.thingiverse.com/thing:3147734

Here we are, fellows. This one is the good one. Street wheels for longboard or skateboard. I'm still testing them, but they work. This time the wheel has two parts: rim and tyre.

Dimensions: 97mm Diameter x 62mm wide aprox. You will need two 608 bearings and one 10mm spacer per wheel (like common skate wheels).

But uncle zenjota, there are plenty of wheels out there on the market. Why you decided to build your own wheels?
That's a good question little Timmy. It's been a while now since I decided to build my own electric longboard, but the wheels I found didn't fit my needs of clearance under the deck, also they are rigid, and I was looking for something more flexible, shock absorbing (I found the MBS Allterrain wheels, they look very good but are hard to get here) so I designed the wheels too. Plus, If I buy them, where's the fun :V? Damn, we are makers Timmy!

Allright, leaving the madness aside, there are some truths. I built my own electric longboard, and after the first try I found some issues I want to improve, so I'm making a new, awesome version (After some tests and checks I will upload some cool stuff ;D )

Important DISCLAIMER: I've designed this objects to be 3d printed, don't forget that. Even if you use the world's best 3d printer, they're still 3d printed objects, and should be managed with caution. I do not take any responsibility for the use you give to them. So please, BE CAREFUL okey? :)