Stratocaster Guitar Neck SHIMS 3D Printer Model
The file 'Stratocaster Guitar Neck SHIMS 3D Printer Model' is (stl) file type, size is 324.5KB.
The file 'Stratocaster Guitar Neck SHIMS 3D Printer Model' is (stl) file type, size is 324.5KB.
Precision Stratocaster neck SHIMS. Different angles from 0.10 to 1.00 degree. The angles are very precise. Created with both positive (raises the neck/strings) and negative (lowers the neck/strings) versions.
The 0.10 deg shim is thinner than the others and can be used by itself or stacked on one of the others.
I used both PLA and PETG when printing with no difference in quality but I prefer PETG because is it less brittle and more flexible.
I use 0.08 layer thickness for a very smooth slope with 0.20 initial layer thickness. You can use thicker layers and then sand if necessary.
This can probably be used for other guitars and can be sanded/cut easily, especially if using PETG.
| Guitar_Shim_0.10_deg_angle_NEG_v1.stl | 63.4KB | |
| Guitar_Shim_0.10_deg_angle_v1.stl | 160.8KB | |
| Guitar_Shim_0.25_deg_angle_NEG_v1.stl | 59.3KB | |
| Guitar_Shim_0.25_deg_angle_v1.stl | 160.8KB | |
| Guitar_Shim_0.50_deg_angle_NEG_v1.stl | 59.3KB | |
| Guitar_Shim_0.50_deg_angle_v1.stl | 113.6KB | |
| Guitar_Shim_0.75_deg_angle_NEG_v1.stl | 59.3KB | |
| Guitar_Shim_0.75_deg_angle_v1.stl | 96.4KB | |
| Guitar_Shim_1.00_deg_angle_NEG_v1.stl | 59.3KB | |
| Guitar_Shim_1.00_deg_angle_v1.stl | 87.0KB |
