Straight Pole To 3/4″ Painter Pole/Broom Handle Thread Adapter 3D Printer Model
The file 'Straight Pole To 3/4″ Painter Pole/Broom Handle Thread Adapter 3D Printer Model' is (stl) file type, size is 3.2MB.
The file 'Straight Pole To 3/4″ Painter Pole/Broom Handle Thread Adapter 3D Printer Model' is (stl) file type, size is 3.2MB.
This is an adapter to add a 3/4" thread to the end of a straight dowel or rod. Various sizes for from 15mm dia, to 25mm diameter round rod.
Use a pipe clamp to secure the adapter to the Rod.
It's a bit brittle when printed in PETG. Try 100% infill and slightly higher temps for better layer adhesion if printing with PETG. This part experiences bending forces when clamped, and if something heavy is screwed onto the end. PLA is probably the best material for this item.
| 15mm.stl | 687.7KB | |
| 16mm.stl | 670.0KB | |
| 17mm.stl | 718.1KB | |
| 18mm.stl | 741.6KB | |
| 19mm.stl | 723.3KB | |
| 20mm.stl | 815.2KB | |
| 21mm.stl | 820.7KB | |
| 22mm.stl | 852.8KB | |
| 23mm.stl | 877.7KB | |
| 24mm.stl | 848.9KB | |
| 25mm.stl | 832.7KB |
