Update: 5/7/24 link to Onshape CAD file: https://cad.onshape.com/documents/d10055e670ec6a5dc411ab11/w/b54b88efc55a3f6494ea1e59/e/5dcd89d2cad49fcb73225636
This is a straight edge guide designed to be used with the Ryobi P601 Hand-held Battery Operated (18V ONE +) Trim Router.
Three versions: Regular, Small, Micro
Hardware Required:
M8 x 1.25 Bolts mostly unthreaded shank (preferred). Length based on version and desired offset. Qty 2. (120mm+ recommended) Threads into router.
M8 x 1.25 x 35mm, Qty 2. For tightening up edge guide at desired distance.
M8 x 1.25 Nut, Qty 2.
M5 x 0.8 x 60mm+ screw fully threaded, (Optional) to assist in Micro adjustments)
I have verified this fits the Ryobi P601, It may fit any router with a 60mm center to center distance between M8 x 1.25 attachment bolts. Feel free to comment if you use this successfully for any other brand router. Originally got the idea based on comments that a Ridgid straight edge guide would also fit. Everything I found was 20$ plus and only available on line thus this design.
| RyobiP601Edge_Guide.stl | 291.6KB | |
| Ryobi_P601_Straight_Edge_Guide_Micro.stl | 261.7KB | |
| Ryobi_P601_Straight_Edge_Guide_Small.stl | 290.6KB | |
| Ryobi_Part_1.x_t | 72.9KB | |
| Ryobi_Part_2.x_t | 70.9KB | |
| Ryobi_Part_3.x_t | 57.6KB |
![Maakmake] Camel Partition Hanger 2 3D Printer Model](https://res.3axis.co/088bdf23-101c-4cbd-8ec1-d99504faa31f/images/198e2ea2-3600-4ee6-8823-90e1b1e3655b_thumb.jpg)