Storage tray for music stand.
The tray measures 200 mm x 156 mm x 7 mm.
The support that attaches to the music stand pole has an 8 mm diameter.
To secure the two supports onto the music stand pole, you’ll need two M5*45 cylindrical head hex screws with two M5 nuts. Additionally, there’s an M6 wing screw (to be threaded into the rear support) that locks everything in the desired position.
These are the dimensions I’ve adopted to fit within the print volume and chosen based on the music stand I have. The tray and support 3 remain unchanged, while the first 2 can be modified according to different requirements (based on the various diameters of the poles that the music stands have). This project may undergo changes over time for the reason mentioned earlier.
December 2024 Update.
The tray has been modified to be used in a music stand pole with a 25mm diameter (the files are named d25 or x3d).
Photos of the installation will arrive soon
| Supporto_1_v4.STL | 104.5KB | |
| Supporto_1_v4_d25_x3d.STL | 108.6KB | |
| Supporto_2_v2.STL | 125.6KB | |
| Supporto_2_v3_d25_x3d.STL | 128.9KB | |
| Supporto_3_v2.STL | 9.7KB | |
| Supporto_3_v2_x3d.STL | 9.7KB | |
| Vassoio_v5.STL | 109.1KB | |
| Vassoio_v5_x3d.STL | 113.1KB |
